Conky Manager is a simple way for those who aren’t familiar with Conky to start using it. I’ve mentioned before that I like Conky and have occasionally mentioned how powerful it can be. However making the first steps is the hardest part. It has a very steep learning curve so anything that gets you started is a good idea. That’s where Conky Manager comes in.
Conky Manager comes with a number of preformatted Conkys and a search of the internet will locate several more packs that can easily be added to Conky Manager.
The screen shows a list of the installed configurations and below a preview of most. There is an option to recreate the previews. This is handy if you edit any of the designs as I did in the displayed example.
Once you’ve selected the design you want there are some options that you can set. These depend on the design but commonly let you choose the screen location and correct network interface and similar personalisations that are unique to your system. You can then start the Conky, set it to autostart whenever you restart the computer. If you want to customise it further you can open it in a text editor.
Conky Manager is available in the repos of most manager distros including Korora and Fedora. You can install it in Korora easily with sudo yum install conky-manager.
If you have ever been curious about Conky and wanted to try it there is no easier way than with Conky Manager, give it a go.
The final stable release of Korora 21 is now available. See Korora Project for full details.
I’ve been testing KDE 4.14.3 on Korora 21 Beta over the last few days. As Korora 20 had the same version there is little difference between the two. However one change that is noticeable is the new configuration module for Touchpads. Korora 21 is based on Fedora 21 and so most, if not all, of this post applies to Fedora 21 too.
Although laptops and hence touchpads are very common, the options to configure them were very poor in the past. They worked but gave little choice in the set up. With the new module there are many more options for adjusting sensitivity. But there also some new options such as Palm Detection, and disable Touchpad while typing.
Another addition I particularly like is the option to disable the touchpad when a mouse is detected. This works well even with my Bluetooth mouse. There is even the option to ignore any detected advice. I guess this is for devices that may be incorrectly detected as a mouse.
KDE 4.14.3 may be one of the last versions of KDE4 as KDE’s Plasma 5 is out and will ultimately take KDE4’s place but for now the current version is great desktop.
The beta release of Korora 21 is now available. The Korora Project.site has the full details. As usual Korora is based on the latest Fedora release with all the latest updates included.
If you have any suggestions for improvement or issues follow the links there.
Over the last couple of weeks I’ve spent some time switching back and forward between Xfce (my preferred Desktop Environment) and KDE. I once ran KDE almost exclusively but for various reasons I’ve been using Xfce for the last couple of years.
One of the reasons was the frequency of KDE to lock up. It would just stop running. I have long suspected it was a graphics problem but had no proof. I have a nVidia GT240 video card and had been using the open source nouveau driver. After a recent lock up I was forcing a shutdown when the screen filled with nouveau errors. Although I prefer to use open source drivers where possible I decided to install the nvidia drivers from RPMFusion using Korora’s PharLap application.
All went well with the installation and it did solve the lock up problems. Doing a bit of research I found an old bug which has been kept current. As far as I can see there has been no action on it. Anyhow problem solved and now I have working Xfce and KDE desktops and can and do switch between them as I feel like it.
Speaking of old bugs a long time I reported a problem with landscape printing and after much investigation by many people it was narrowed down to cups-filters and an update provided which fixed the problem. Now some months later those packages were updated and the problem returned. I commented on the bug and straight away another update was provided along with an apology. Well done Jiri Popelka. I tested and provided karma to the update so hopefully it is making its way through the update system now.
I’ve been testing installations on a uefi system the last couple of days. I was surprised how simple it was with Korora and so also with Fedora. More details later but if you want a linux system on an uefi computer either as a single installation or a dual boot Korora is the way to go.
I did post some time ago about the disappearance of Tilda from Fedora. At the time this was due to the lack of upstream support and the fact that development had stalled. Since then development has again started and Tilda is being improved. While it is not (yet?) available for Fedora it is a simple procedure to add it. The following link covers compiling and installing it. I tested it in Korora 20 Xfce and it worked fine and I have the latest Tilda running now.
/kernel_reloaded/ » compile latest tilda and enjoy solarized terminal.
I use a couple of music applications when I’m working. Mostly I use Amarok but I also like Clementine. It was inspired by Amarok 1.4 so is popular with many who didn’t like the changes brought by KDE 4.
For some time I’ve had an issue with Clementine, it wouldn’t save the last played date. Not a major problem for most people I guess. However I use a dynamic playlist that is designed to play all the tracks in my collection with minimum repetition. It uses the last played date and won’t repeat something that has been played in the last few weeks.
I did a search online and didn’t find anything. I also asked on a couple of forums but got no response. Today I got around to looking at it again. I found the the config directory, located at ~/.config/clementine, contained 2 subdirectories. One of these is called “networkcache”. I deleted this as an experiment and was surprised to find the date saved again. Strangely I notice that the directory hasn’t been recreated so maybe it isn’t used any more.
However problem solved, Clementine is working again.
I had one of those days where you don’t do anything much but seem to have a number of small successes. That has been my day.
First I installed Korora 20 Xfce on my netbook. I don’t use the netbook much so it hasn’t been updated for a while. There was no issues, Korora installed without problems.
While checking over the netbook I noticed something that has been happening for a while. My conky is set up to show the current power adapter status, charging, discharging etc. For a couple of versions it has shown ‘no adapter, charging’. Obviously something was wrong but it said charging when it was so it wasn’t a major problem. Looking at the Conky man page I found there is an option for the acpiacadapter variable to specify the subfolder of /sys/class/power_supply that indicates the current state. It looks for AC or ADP1 if the option isn’t used. Fedora and hence Korora uses AC0. Adding that as the option fixed the problem. Easy fix when you take the time to research it.
Second, a minor nuisance is the need to enter my password twice when logging in on my netbook or laptop. I use the same password for login as for the keyring. I found an older post on the Fedora Xfce mailling list that gave the solution. Deleting the leading – from the line
-auth optional pam_gnome_keyring.so
in /etc/pam.d/lightdm allows LightDM to open the keyring so it can be used by other applications. Again a simple fix after a bit of research.
I also updated the links on this blog when I noticed that the Korora link was for Kororaa. So I checked all the others and found a couple of dead links and a couple of typos too.
All in all an easy day but some little annoyances fixed.
Korora Project has just announced the release of Korora 20. It adds 3 new desktops environments and many new features. I’ve been using the beta release of both Xfce and KDE for some time and found no problems. It is a great update, full details in the link at the start.
As part of the new release is the launch of a new website and support site. Try it out.